Home | The Builders' Association

Call Ryan Johnson in the Kansas City Region and Becky Mitchell in the Central & Southern Regions.

Event Calendar

Change View

September 28 2020
OSHA Hazard Communication Standard Course 09/28/2020 Builders’ Assoc. Jeff. City Svc. Ctr. OSHA standards require employers to provide exposed employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. This course covers the general requirements of OSHA’s Hazard Communication Standard and provides participants with the knowledge to facilitate recognition and understanding of chemical safety in the workplace. Specific topics covered in this course include hazard classification of health and physical hazards, chemical labeling, signal words, GHS Symbols (Pictograms), Safety Data Sheets (SDSs) 16 – section format and much more. Add to Calendar
September 28 2020
OSHA Focus Four Hazard Course 09/28/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course focuses on the top four hazards in the construction industry (falls, electrocutions, struck-bys and caught-ins). Construction workers make up approximately 6% of the country’s workforce, but account for more than 20% of all job related fatalities each year. Construction is one of the most hazardous industries in America; each year a substantial number of construction workers, and countless others, are injured by these four hazards. Participants will be introduced to accident prevention techniques and hazard recognition to improve their awareness about the focus four hazards and ways to abate these hazards. Add to Calendar
September 29 2020
Back to School Beers 09/29/2020 The Builders Training Center Add to Calendar
September 30 2020
OSHA Focus Four Hazard Course 09/30/2020 The Builders’ Association Training Center This course focuses on the top four hazards in the construction industry (falls, electrocutions, struck-bys and caught-ins). Construction workers make up approximately 6% of the country’s workforce, but account for more than 20% of all job related fatalities each year. Construction is one of the most hazardous industries in America; each year a substantial number of construction workers, and countless others, are injured by these four hazards. Participants will be introduced to accident prevention techniques and hazard recognition to improve their awareness about the focus four hazards and ways to abate these hazards. Add to Calendar
October 2 2020
OSHA 30-Hour Construction Outreach Course 10/02/2020 The Builders’ Association Training Center The OSHA 30-Hour Construction Outreach Course is an excellent course for superintendents, field supervisors, project managers, safety professionals, or anyone responsible for safety and health issues in your organization. Attendees will gain an understanding of OSHA Construction Safety Regulations as they apply to real world experiences. Each participant will receive a 29 CFR 1926 Construction Standards Book. Add to Calendar
October 6 2020
Project Manager Development Program 10/06/2020 Online Via Zoom Add to Calendar
October 9 2020
Lunch With Mitch Holthus, Voice of the Kansas City Chiefs 10/09/2020 Stoney Creek Hotel and Conference Center Add to Calendar
October 14 2020
OSHA Silica Competent Person Course 10/14/2020 The Builders’ Association Training Center The purpose of this course is to educate course participants about OSHA’s Crystalline Silica Standard in the Construction Industry and provide an understanding of the hazards of respirable crystalline silica and appropriate ways to limit exposure. A key component in preventing overexposure to silica and subsequent disease is to have at least one individual on the jobsite who is capable of recognizing and evaluating situations where over exposure may be occurring; who knows how to evaluate the exposure potential; and who can make an initial recommendation on how to control that exposure. This is the role of the “Silica Competent Person.” OSHA 29 CFR 1926.1153 requires each employer to have a “Silica Competent Person” who can identify existing and foreseeable respirable crystalline silica hazards. Add to Calendar
October 14 2020
OSHA Respiratory Protection Course 10/14/2020 The Builders’ Association Training Center This course covers OSHA’s Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights also include correct respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon successful course completion participants will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Add to Calendar
October 20 2020
American Red Cross Workplace First Aid/AED/CPR Course 10/20/2020 The Builders’ Association Training Center The purpose of this course is to give individuals in the workplace knowledge and skills necessary to recognize and provide basic first aid care for injuries and sudden illnesses until advanced medical personnel arrive and take over. This course also includes information on breathing or cardiac emergencies. Please wear comfortable clothing, as you will be asked to perform skills. Attendance of the entire session is required and participants must complete all skill practices for certification. Add to Calendar
October 23 2020
Seminar: Print Reading, Springfield 10/23/2020 Southern Region Service Center Add to Calendar
October 26 2020
OSHA 10-Hour Construction Outreach Course 10/26/2020 Builders’ Assoc. Jeff. City Svc. Ctr. The OSHA 10-Hour Construction Outreach Course provides safety and health training to prepare employees for basic hazards found in the construction industry. Participants will gain an understanding of OSHA’s Construction Safety and Health Regulations as they apply to real world experiences. Each participant will receive a 29 CFR 1926 Construction Standards Book. Add to Calendar
October 28 2020
OSHA Respiratory Protection Course 10/28/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course covers OSHA’s Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights also include correct respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon successful course completion participants will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Add to Calendar
October 28 2020
OSHA Silica Competent Person Course 10/28/2020 Builders’ Assoc. Jeff. City Svc. Ctr. The purpose of this course is to educate course participants about OSHA’s Crystalline Silica Standard in the Construction Industry and provide an understanding of the hazards of respirable crystalline silica and appropriate ways to limit exposure. A key component in preventing overexposure to silica and subsequent disease is to have at least one individual on the jobsite who is capable of recognizing and evaluating situations where over exposure may be occurring; who knows how to evaluate the exposure potential; and who can make an initial recommendation on how to control that exposure. This is the role of the “Silica Competent Person.” OSHA 29 CFR 1926.1153 requires each employer to have a “Silica Competent Person” who can identify existing and foreseeable respirable crystalline silica hazards. Add to Calendar
November 2 2020
Construction Supervision Fundamentals 11/02/2020 Online Through Zoom Add to Calendar
November 3 2020
OSHA Scaffolding Course 11/03/2020 Builders’ Assoc. Springfield Svc. Ctr. This course covers the requirements for safe construction and use of scaffolding using OSHA’s construction scaffold standards as a guide. OSHA standards require employers to train each employee who performs work while on a scaffold trained to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training and maintenance, repair and inspection requirements. Add to Calendar
November 3 2020
OSHA Forklift Operator Course 11/03/2020 The Builders’ Association Training Center This course has been designed to reduce injuries and property damage in the work environment for newly trained operators ready to go beyond the basics to experienced operators who are either new to your organization or have been there for an extended time. Course topics include inspection of equipment, design criteria of the equipment, picking up the load, moving the load, and safely setting down the load. Add to Calendar
November 3 2020
American Red Cross Workplace First Aid/AED/CPR Course 11/03/2020 Builders’ Assoc. Springfield Svc. Ctr. The purpose of this course is to give individuals in the workplace knowledge and skills necessary to recognize and provide basic first aid care for injuries and sudden illnesses until advanced medical personnel arrive and take over. This course also includes information on breathing or cardiac emergencies. Please wear comfortable clothing, as you will be asked to perform skills. Attendance of the entire session is required and participants must complete all skill practices for certification. Add to Calendar
November 4 2020
OSHA Forklift Operator Course 11/04/2020 Builders’ Assoc. Springfield Svc. Ctr. This course has been designed to reduce injuries and property damage in the work environment for newly trained operators ready to go beyond the basics to experienced operators who are either new to your organization or have been there for an extended time. Course topics include inspection of equipment, design criteria of the equipment, picking up the load, moving the load, and safely setting down the load. Add to Calendar
November 4 2020
OSHA Silica Competent Person Course 11/04/2020 Builders’ Assoc. Springfield Svc. Ctr. The purpose of this course is to educate course participants about OSHA’s Crystalline Silica Standard in the Construction Industry and provide an understanding of the hazards of respirable crystalline silica and appropriate ways to limit exposure. A key component in preventing overexposure to silica and subsequent disease is to have at least one individual on the jobsite who is capable of recognizing and evaluating situations where over exposure may be occurring; who knows how to evaluate the exposure potential; and who can make an initial recommendation on how to control that exposure. This is the role of the “Silica Competent Person.” OSHA 29 CFR 1926.1153 requires each employer to have a “Silica Competent Person” who can identify existing and foreseeable respirable crystalline silica hazards. Add to Calendar
November 5 2020
OSHA Focus Four Hazard Course 11/05/2020 Builders’ Assoc. Springfield Svc. Ctr. This course focuses on the top four hazards in the construction industry (falls, electrocutions, struck-bys and caught-ins). Construction workers make up approximately 6% of the country’s workforce, but account for more than 20% of all job related fatalities each year. Construction is one of the most hazardous industries in America; each year a substantial number of construction workers, and countless others, are injured by these four hazards. Participants will be introduced to accident prevention techniques and hazard recognition to improve their awareness about the focus four hazards and ways to abate these hazards. Add to Calendar
November 5 2020
OSHA Hazard Communication Standard Course 11/05/2020 Builders’ Assoc. Springfield Svc. Ctr. OSHA standards require employers to provide exposed employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. This course covers the general requirements of OSHA’s Hazard Communication Standard and provides participants with the knowledge to facilitate recognition and understanding of chemical safety in the workplace. Specific topics covered in this course include hazard classification of health and physical hazards, chemical labeling, signal words, GHS Symbols (Pictograms), Safety Data Sheets (SDSs) 16 – section format and much more. Add to Calendar
November 6 2020
OSHA Excavation Competent Person Course 11/06/2020 Builders’ Assoc. Springfield Svc. Ctr. This course has been designed specifically for those involved in excavation, trenching, and related operations. OSHA requires a “Competent Person” to oversee these jobsites, as they are some of the most hazardous of all construction operations. Add to Calendar
November 6 2020
OSHA Confined Space Entry for Construction Course 11/06/2020 Builders’ Assoc. Springfield Svc. Ctr. This course covers the safety and health hazards associated with confined spaces in the construction industry. Course topics include recognition of confined space hazards, identification of permit required confined spaces (PRCS) and non-permit required confined spaces (NPRCS), use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course also covers the key differences between OSHA’s general industry vs. construction standards. Add to Calendar
November 10 2020
OSHA Scaffolding Course 11/10/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course covers the requirements for safe construction and use of scaffolding using OSHA’s construction scaffold standards as a guide. OSHA standards require employers to train each employee who performs work while on a scaffold trained to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training and maintenance, repair and inspection requirements. Add to Calendar
November 11 2020
OSHA Focus Four Hazard Course 11/11/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course focuses on the top four hazards in the construction industry (falls, electrocutions, struck-bys and caught-ins). Construction workers make up approximately 6% of the country’s workforce, but account for more than 20% of all job related fatalities each year. Construction is one of the most hazardous industries in America; each year a substantial number of construction workers, and countless others, are injured by these four hazards. Participants will be introduced to accident prevention techniques and hazard recognition to improve their awareness about the focus four hazards and ways to abate these hazards. Add to Calendar
November 11 2020
OSHA Forklift Operator Course 11/11/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course has been designed to reduce injuries and property damage in the work environment for newly trained operators ready to go beyond the basics to experienced operators who are either new to your organization or have been there for an extended time. Course topics include inspection of equipment, design criteria of the equipment, picking up the load, moving the load, and safely setting down the load. Add to Calendar
November 11 2020
American Red Cross Workplace First Aid/AED/CPR Course 11/11/2020 Builders’ Assoc. Jeff. City Svc. Ctr. The purpose of this course is to give individuals in the workplace knowledge and skills necessary to recognize and provide basic first aid care for injuries and sudden illnesses until advanced medical personnel arrive and take over. This course also includes information on breathing or cardiac emergencies. Please wear comfortable clothing, as you will be asked to perform skills. Attendance of the entire session is required and participants must complete all skill practices for certification. Add to Calendar
November 12 2020
OSHA Fall Protection Course 11/12/2020 Builders’ Assoc. Jeff. City Svc. Ctr. OSHA standards require employers to provide fall protection training for each employee who might be exposed to fall hazards. The training shall enable employees to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. This Fall Protection Course includes, but is not limited to: establishing definitive parts of Personal Fall Arrest Systems (including body supports, lanyards, self-retracting lifelines, rope grabs, and anchorage components), anchorage points (determination and suitability), arresting forces (limits, methods to reduce, etc.), and fall distances (limits, deceleration distances). This course also covers the usage of equipment including: ladder climbing systems, horizontal lifeline systems, rescue and retrieval systems, rope grab systems, self-retracting lifelines, and care/maintenance of fall protection equipment upon request. Add to Calendar
November 12 2020
OSHA Hazard Communication Standard Course 11/12/2020 Builders’ Assoc. Jeff. City Svc. Ctr. OSHA standards require employers to provide exposed employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. This course covers the general requirements of OSHA’s Hazard Communication Standard and provides participants with the knowledge to facilitate recognition and understanding of chemical safety in the workplace. Specific topics covered in this course include hazard classification of health and physical hazards, chemical labeling, signal words, GHS Symbols (Pictograms), Safety Data Sheets (SDSs) 16 – section format and much more. Add to Calendar
November 13 2020
OSHA Excavation Competent Person Course 11/13/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course has been designed specifically for those involved in excavation, trenching, and related operations. OSHA requires a “Competent Person” to oversee these jobsites, as they are some of the most hazardous of all construction operations. Add to Calendar
November 13 2020
OSHA Confined Space Entry for Construction Course 11/13/2020 Builders’ Assoc. Jeff. City Svc. Ctr. This course covers the safety and health hazards associated with confined spaces in the construction industry. Course topics include recognition of confined space hazards, identification of permit required confined spaces (PRCS) and non-permit required confined spaces (NPRCS), use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course also covers the key differences between OSHA’s general industry vs. construction standards. Add to Calendar
November 16 2020
OSHA Hazard Communication Standard Course 11/16/2020 The Builders’ Association Training Center OSHA standards require employers to provide exposed employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. This course covers the general requirements of OSHA’s Hazard Communication Standard and provides participants with the knowledge to facilitate recognition and understanding of chemical safety in the workplace. Specific topics covered in this course include hazard classification of health and physical hazards, chemical labeling, signal words, GHS Symbols (Pictograms), Safety Data Sheets (SDSs) 16 – section format and much more. Add to Calendar
November 17 2020
OSHA Excavation Competent Person Course 11/17/2020 The Builders’ Association Training Center This course has been designed specifically for those involved in excavation, trenching, and related operations. OSHA requires a “Competent Person” to oversee these jobsites, as they are some of the most hazardous of all construction operations. Add to Calendar
November 17 2020
OSHA Confined Space Entry for Construction Course 11/17/2020 The Builders’ Association Training Center This course covers the safety and health hazards associated with confined spaces in the construction industry. Course topics include recognition of confined space hazards, identification of permit required confined spaces (PRCS) and non-permit required confined spaces (NPRCS), use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements. This course also covers the key differences between OSHA’s general industry vs. construction standards. Add to Calendar
November 18 2020
OSHA Fall Protection Course 11/18/2020 The Builders’ Association Training Center OSHA standards require employers to provide fall protection training for each employee who might be exposed to fall hazards. The training shall enable employees to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. This Fall Protection Course includes, but is not limited to: establishing definitive parts of Personal Fall Arrest Systems (including body supports, lanyards, self-retracting lifelines, rope grabs, and anchorage components), anchorage points (determination and suitability), arresting forces (limits, methods to reduce, etc.), and fall distances (limits, deceleration distances). This course also covers the usage of equipment including: ladder climbing systems, horizontal lifeline systems, rescue and retrieval systems, rope grab systems, self-retracting lifelines, and care/maintenance of fall protection equipment upon request. Add to Calendar
November 19 2020
OSHA Silica Competent Person Course 11/19/2020 The Builders’ Association Training Center The purpose of this course is to educate course participants about OSHA’s Crystalline Silica Standard in the Construction Industry and provide an understanding of the hazards of respirable crystalline silica and appropriate ways to limit exposure. A key component in preventing overexposure to silica and subsequent disease is to have at least one individual on the jobsite who is capable of recognizing and evaluating situations where over exposure may be occurring; who knows how to evaluate the exposure potential; and who can make an initial recommendation on how to control that exposure. This is the role of the “Silica Competent Person.” OSHA 29 CFR 1926.1153 requires each employer to have a “Silica Competent Person” who can identify existing and foreseeable respirable crystalline silica hazards. Add to Calendar
November 19 2020
OSHA Respiratory Protection Course 11/19/2020 The Builders’ Association Training Center This course covers OSHA’s Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements. Program highlights also include correct respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment. Upon successful course completion participants will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards. Add to Calendar
November 24 2020
OSHA Focus Four Hazard Course 11/24/2020 The Builders’ Association Training Center This course focuses on the top four hazards in the construction industry (falls, electrocutions, struck-bys and caught-ins). Construction workers make up approximately 6% of the country’s workforce, but account for more than 20% of all job related fatalities each year. Construction is one of the most hazardous industries in America; each year a substantial number of construction workers, and countless others, are injured by these four hazards. Participants will be introduced to accident prevention techniques and hazard recognition to improve their awareness about the focus four hazards and ways to abate these hazards. Add to Calendar
November 30 2020
OSHA 10-Hour Construction Outreach Course 11/30/2020 The Builders’ Association Training Center The OSHA 10-Hour Construction Outreach Course provides safety and health training to prepare employees for basic hazards found in the construction industry. Participants will gain an understanding of OSHA’s Construction Safety and Health Regulations as they apply to real world experiences. Each participant will receive a 29 CFR 1926 Construction Standards Book. Add to Calendar
December 1 2020
2020 CLC Platinum Events Package 12/01/2020 Add to Calendar
December 1 2020
2020 CLC Membership 12/01/2020 Add to Calendar
December 2 2020
American Red Cross Workplace First Aid/AED/CPR Course 12/02/2020 The Builders’ Association Training Center The purpose of this course is to give individuals in the workplace knowledge and skills necessary to recognize and provide basic first aid care for injuries and sudden illnesses until advanced medical personnel arrive and take over. This course also includes information on breathing or cardiac emergencies. Please wear comfortable clothing, as you will be asked to perform skills. Attendance of the entire session is required and participants must complete all skill practices for certification. Add to Calendar
December 7 2020
OSHA Fall Protection Course 12/07/2020 Builders’ Assoc. Springfield Svc. Ctr. OSHA standards require employers to provide fall protection training for each employee who might be exposed to fall hazards. The training shall enable employees to recognize the hazards of falling and shall train each employee in the procedures to be followed in order to minimize these hazards. This Fall Protection Course includes, but is not limited to: establishing definitive parts of Personal Fall Arrest Systems (including body supports, lanyards, self-retracting lifelines, rope grabs, and anchorage components), anchorage points (determination and suitability), arresting forces (limits, methods to reduce, etc.), and fall distances (limits, deceleration distances). This course also covers the usage of equipment including: ladder climbing systems, horizontal lifeline systems, rescue and retrieval systems, rope grab systems, self-retracting lifelines, and care/maintenance of fall protection equipment upon request. Add to Calendar
December 8 2020
OSHA 10-Hour Construction Outreach Course 12/08/2020 Builders’ Assoc. Springfield Svc. Ctr. The OSHA 10-Hour Construction Outreach Course provides safety and health training to prepare employees for basic hazards found in the construction industry. Participants will gain an understanding of OSHA’s Construction Safety and Health Regulations as they apply to real world experiences. Each participant will receive a 29 CFR 1926 Construction Standards Book. Add to Calendar
December 14 2020
OSHA 10-Hour Construction Outreach Course 12/14/2020 Builders’ Assoc. Jeff. City Svc. Ctr. The OSHA 10-Hour Construction Outreach Course provides safety and health training to prepare employees for basic hazards found in the construction industry. Participants will gain an understanding of OSHA’s Construction Safety and Health Regulations as they apply to real world experiences. Each participant will receive a 29 CFR 1926 Construction Standards Book. Add to Calendar

View All Events